HT line
The HT line is composed of satellite antennas with two stabilization axes plus the automatic polarizer, standard starting from the MST 65.
Control unit
The Sat 105 control unit allows the storage of twelve satellites and the connection of multiple decoders thanks to the possibility of connecting an expandable multiswitch switchboard. The digital display allows you to monitor all the antenna functions, view the pointing status, the chosen satellite (name and position), the signal level and the gyro connection. An internal menu then allows you to view / set different values.
From the control unit it is then possible to manually adjust the aiming in cases where the signal is low due to weather conditions, any obstacles between the antenna and the satellite or when the satellite coverage limits are reached.
Radome
On request it is possible to customize the color of the radome to match your boat. Just provide the RAL code and the desired customization to receive a quote.
In this way you will receive the antenna ready for installation and without any risk of signal reduction due to unsuitable colors.
Installation
The installation of the antennas is very simple and fast thanks to the “Plug and Play” connectors.
Support
The assistance on our products has been carried out remotely for years, “worldwide”. In fact, it is sufficient that an internet connection is present on board, in this way the service technicians, from their headquarters, can reprogram, update the firmware, change satellites or frequencies for tracking anywhere in the world, in a few minutes.
The HT line consists of the following models:
Check HT LINE MODELS
MST 55 HT
- Parable: 55 cm
- Stabilization: 2 axes
- Radome diameter: 58 cm
- Radome height: 65 cm
- Weight: 25 kg
- Control unit: Sat 105
- ACU dimension: 367x241x70 mm
- Power supply: Power supply: 220Vac / 110Vac
MST 65 HT
- Parable: 65 cm
- Stabilization: 2 axes
- Radome diameter: 70 cm
- Radome height: 80 cm
- Weight: 32 kg
- Control unit: Sat 105
- ACU dimension: 367x241x70 mm
- Power supply: 220Vac / 110Vac
MST 75 HT
- Parable: 72 cm
- Stabilization: 2 axes
- Radome diameter: 81 cm
- Radome height: 87 cm
- Weight: 38 kg
- Control unit: Sat 105
- ACU dimension: 367x241x70 mm
- Power supply: 220Vac / 110Vac
MST 85 HT
- Parable: 82 cm
- Stabilization: 2 axes
- Radome diameter: 92 cm
- Radome height: 96 cm
- Weight: 40 kg
- Control unit: Sat 105
- ACU dimension: 367x241x70 mm
- Power supply: Power supply: 220Vac / 110Vac
MST 95 HT
- Parable: 92 cm
- Stabilization: 2 axes
- Radome diameter: 105 cm
- Radome height: 110 cm
- Weight: 48 kg
- Control unit: Sat 105
- ACU dimension: 367x241x70 mm
- Power supply: 220Vac / 110Vac
MST 100 HT
- Parable: 100 cm
- Stabilization: 2 axes
- Radome diameter: 130 cm
- Radome height: 140 cm
- Weight: 90 kg
- Control unit: Sat 105
- ACU dimension: 367x241x70 mm
- Power supply: 220Vac / 110Vac
MST 105 HT
- Parable: 105 cm
- Stabilization: 2 axes
- Radome diameter: 130 cm
- Radome height: 140 cm
- Weight: 95 kg
- Control unit: Sat 105
- ACU dimension: 367x241x70 mm
- Power supply: Power supply: 220Vac / 110Vac
MST 120 HT
- Parable: 116 cm
- Stabilization: 2 axes
- Radome diameter: 130 cm
- Radome height: 140 cm
- Weight: 130 kg
- Control unit: Sat 105
- ACU dimension: 367x241x70 mm
- Power supply: 220Vac / 110Vac
MST 135 HT
- Parable: 135 cm
- Stabilization: 2 axes
- Radome diameter: 145 cm
- Radome height: 148 cm
- Weight: 150 kg
- Control unit: Sat 105
- ACU dimension: 367x241x70 mm
- Power supply: 220Vac / 110Vac